Description

3-in-1 Laparoscopic Clip Applicator for LT200, LT300 & LT400 Clips

The 3-in-1 laparoscopic clip applicator is a reusable surgical instrument designed for the controlled application of compatible titanium ligating clips used for vessel and tissue closure. Its multi-size configuration supports LT200, LT300, and LT400 clip sizes, allowing one applicator to accommodate different clip requirements during appropriate laparoscopic surgical procedures.

With a 10 mm diameter and approximately 330 mm working length, this laparoscopic clip applicator is designed to provide convenient access and controlled clip placement through compatible laparoscopic ports.

What Is a 3-in-1 Laparoscopic Clip Applicator?

A 3-in-1 laparoscopic clip applicator is a surgical instrument designed to apply different sizes of ligating clips using a single reusable instrument. Instead of requiring separate applicators for small, medium, and large clips, the multi-size design can support compatible LT200, LT300, and LT400 clips.

This can help streamline surgical instrument selection while providing controlled deployment of ligating clips for suitable vessel and tissue closure applications.

Key Features

Compatible With LT200, LT300 & LT400 Clips

The primary advantage of this 3-in-1 clip applicator is its compatibility with three clip sizes:

• LT200 – small-size compatible clips
• LT300 – medium-size compatible clips
• LT400 – large/long-size compatible clips

Clip compatibility should always be verified with the specific manufacturer and applicator model before clinical use.

10 mm Diameter & 330 mm Working Length

The instrument features a standard 10 mm shaft diameter and approximately 330 mm working length, making it suitable for compatible laparoscopic access systems and surgical applications.

Surgical-Grade Stainless Steel

Manufactured from surgical-grade stainless steel, the reusable clip applicator is designed for durability, strength, corrosion resistance, and repeated sterilization when specified by the manufacturer.

360-Degree Rotatable Ergonomic Handle

The 360-degree rotatable handle provides flexibility in instrument positioning during laparoscopic procedures. Its ergonomic design is intended to support comfortable handling and controlled manipulation.

Multi-Size Jaw System

The interchangeable or multi-size jaw configuration allows the applicator to accommodate compatible LT200, LT300, and LT400 clips. This multi-functional design can reduce the need for maintaining several separate clip applicators.

Reusable & Autoclavable

The instrument is designed for repeated use and sterilization where validated by the manufacturer. Proper cleaning, disinfection, inspection, packaging, and autoclaving should always be performed according to the applicable manufacturer’s instructions for use (IFU).

Applications of 3-in-1 Laparoscopic Clip Applicator

The laparoscopic clip applicator for LT200, LT300, and LT400 clips can be used in appropriate minimally invasive surgical procedures requiring ligating clip application.

Potential applications include:

• Vessel closure and ligation
• Tissue closure
• Duct ligation
• General laparoscopic procedures
• Minimally invasive surgical applications
• Procedures requiring different sizes of compatible titanium ligating clips

The appropriate clip size and surgical application depend on the specific procedure, target anatomy, clip specifications, and manufacturer’s intended use.

Technical Specifications

Advantages of a 3-in-1